DOD SERVER PROB

Read log files for errors! If this fails, come here for help

Moderator: Forum Moderator

Locked
sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

DOD SERVER PROB

Post by sharp-shooter » Wed Aug 10, 2005 4:26 pm

ok iv tryed everything and iv followed the instution all to the last word and i keep gettign this prob Mod_NumForName: sprites/snow.spr not found why do i keep getitng it i know iv posted this on the amx modx.com but nto one answering so im asking here plz can anyone help me?

User avatar
Geesu
<b>King of the world!</b>
Posts: 3159
Joined: Tue Jul 05, 2005 9:24 pm
Contact:

Post by Geesu » Wed Aug 10, 2005 4:38 pm

look for that file in the cstrike/sprites directory and copy it to the dod/sprites directory
No Support via PM

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Wed Aug 10, 2005 5:06 pm

do i have to have the sprite folder in my dedi server/dod? or in my day of defeat/dod
and sprites

User avatar
Lazarus Long
Lead PITA SOB
Posts: 618
Joined: Tue Jul 05, 2005 9:24 pm

Post by Lazarus Long » Thu Aug 11, 2005 12:36 am

sharp-shooter:

You need it in the "dod/sprites" folder from where you start your server.

Regards,
Lazarus

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 1:31 am

well atm my sprites folder in in this location: :\Program CFiles\Valve\Steam\SteamApps\account\dedicated server\dod
and the folder is read only some reason not sure about that

User avatar
Lazarus Long
Lead PITA SOB
Posts: 618
Joined: Tue Jul 05, 2005 9:24 pm

Post by Lazarus Long » Thu Aug 11, 2005 1:54 am

sharp-shooter:

So it's a dedicated server running under Windows. OK, you need to put the snow.spr inside the "%ProgramFiles%\Valve\Steam\SteamApps\<your steam account name>\dedicated server\dod\sprites" folder.

About it being read-only, you either are trying to access the folder from a restricted Windows account other than the one you installed Steam with, you for some reason have it marked as read-only (right click the "%ProgramFiles%\Valve\Steam\SteamApps\<your steam account name>" folder, go to Properties, unset the read-only mark and tell it to process all sub-folders), or you have filesystem inconsistencies (open a Command Prompt enter "chkdsk /x" and at the next reboot your filesystem will be checked/fixed).

I hope this helps,
Lazarus

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 3:11 am

can somsone tell me how i can get bots itno my dod server?

User avatar
Lazarus Long
Lead PITA SOB
Posts: 618
Joined: Tue Jul 05, 2005 9:24 pm

Post by Lazarus Long » Thu Aug 11, 2005 9:08 am

sharp-shooter wrote:can somsone tell me how i can get bots itno my dod server?
Read the stickies!
Lazarus

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 9:13 am

where and whihc ones?

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 9:17 am

and most fo all those r for cs not dod i need dod bots not cs podbot is for cs only from wat i know off

User avatar
Lazarus Long
Lead PITA SOB
Posts: 618
Joined: Tue Jul 05, 2005 9:24 pm

Post by Lazarus Long » Thu Aug 11, 2005 9:19 am

sharp-shooter:
sharp-shooter wrote:where and whihc ones?
Here in the forum, duuhhh...

There are only four, by the subjects there are only two that might apply, one of them is really short so you can rule it out very fast, so it's the other...

Regards,
Lazarus

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 1:20 pm

none of them help em with my bot problem at all all iv found about a bot is does wc3ft do bots etc answer; yes
thats it

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Thu Aug 11, 2005 2:22 pm

all need is a easy to set up bot mod onyl one iv found is hrikebot but thats to hard for me to underatsn on how to get it workinging

User avatar
Lazarus Long
Lead PITA SOB
Posts: 618
Joined: Tue Jul 05, 2005 9:24 pm

Post by Lazarus Long » Thu Aug 11, 2005 2:30 pm

sharp-shooter:
sharp-shooter wrote:none of them help em with my bot problem at all all iv found about a bot is does wc3ft do bots etc answer; yes
thats it
I'm not stupid, so if I tell you that you can get your answer someplace, I'm sure of it.

Anyhow this time only I'll take you there by the hand:

Open Links to all the files you need to install Warcraft 3 FT MOD, scroll down to the very bottom of the post 'till you get to section "d. Extra non-required files" and read the third point.

If you had done what I suggested before you couldn't miss it.

EDIT:

This was posted when I was replying so I missed it before:
sharp-shooter wrote:all need is a easy to set up bot mod onyl one iv found is hrikebot but thats to hard for me to underatsn on how to get it workinging
There is no such thing, and all the good things take a little effort.

You can also try to search Google for Day of Defeat bots.
Lazarus

sharp-shooter
Peon
Posts: 9
Joined: Wed Aug 10, 2005 4:22 pm

Post by sharp-shooter » Fri Aug 12, 2005 2:28 pm

Lazarus Long wrote:
I'm not stupid,
1. i never said u was stupid in anyway.
2. im sry i had to make u type so much but its nto my folt i didnt properly understand wat or where u mean u just said sticky's and i looked threw them all and everythign and none did my answer.
3. wat is no such thign dod bot program or easy bot program??
4. i have tryed and i kept gettign the same thing strumbot and stikebot both i cant figure out how to work and also anything else i got didnt work or i didnt undersatnd how to work,
5. iv followed the skrtiebot manual and its a buch of *** ***** ******* ********* crap everythign i tryed to do didnt work even when i put in

gamedll dlls/shrikebot.dll


gamedll dlls/shrikebot_i386.so
it stopped my wc3ft from working and also my amx now and then everytimes i tryed

itx
Peon
Posts: 1
Joined: Fri Aug 19, 2005 3:23 pm
Location: Detroit, MI
Contact:

Post by itx » Fri Aug 19, 2005 3:30 pm

Thats probably because you cannot use the liblist.gam file to start the bot if you run admin/amx/metamod. Instead, you have to create a file in your metamod folder (i.e. ..../dod/addons/metamod) called config.ini, and place the game dll text (i.e. gamedll dlls/shrikebot.dll) into it.

Simple stuff really, and has been posted in various places on the website, in the manual, and in at least 20 places on the forums.......




Someday we might just have to do what war3ft does and zip up the whole thing, amxx/metamod/bot all in one....

Locked